RME introduces a new Audio Interface.
The Fireface UFX is RME’s new flagship and works both with USB and Firewire.
The Totalmix interface is revamped and is supported by two different DSP-chips.
According to RME it’s already shipping.
Here are the specs:
AD, Line In 1-8, rear
Signal to Noise ratio (SNR): 110 dB RMS unweighted, 113 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 21.5 kHz
Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45.5 kHz
Frequency response @ 192 kHz, -1 dB: 5 Hz – 66.5 kHz
THD: < -110 dB, < 0.00032 %
THD+N: < -104 dB, < 0.00063 %
Channel separation: > 110 dB
Input: 6.3 mm TRS jack, electronically balanced
Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV
Input level for 0 dBFS @ Lo Gain: +19 dBu
Input level for 0 dBFS @ +4 dBu: +13 dBu
Input level for 0 dBFS @ -10 dBV: +2 dBV
Microphone In 9-12, front
As AD, but:
Input: XLR, electronically balanced
Signal to Noise ratio (SNR): 112 dB RMS unweighted, 115 dBA
Gain range: 65 dB
Maximum input level, Gain 0 dB: +12 dBu
Instrument In 9-12, front
As AD, but:
Input: 6.3 mm TS jack, unbalanced
Signal to Noise ratio (SNR): 112 dB RMS unweighted, 115 dBA
Gain range: 55 dB
DA, Line Out 3-8, rear
Dynamic range (DR): 115 dB RMS unweighted, 118 dBA
Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 22 kHz
Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 34 kHz
Frequency response @ 192 kHz, -1 dB: 5 Hz – 50 kHz
THD: -104 dB, < 0.00063 %
THD+N: -100 dB, < 0.001 %
Channel separation: > 110 dB
Output: 6.3 mm TRS jack, servo-balanced
Output impedance: 75 Ohm
Output level switchable Hi Gain, +4 dBu, -10 dBV
Output level at 0 dBFS @ Hi Gain: +19 dBuB
Output level at 0 dBFS @ +4 dBu: +13 dBu
Output level at 0 dBFS @ -10 dBV: +2 dBV
Leave a Reply